Focus Servo Press P2224

Focus Servo Presses are suitable for all kinds of applications where is required a production quality with zero defects, an high level of flexibility and look also to energy cost saving. Our servo presses are used in
several of industrial automated processes as: press fit,
joining and forming.

P2224 is a must to control industrial processes thanks to the precise force sensor, integrated in the bearing box and capable to detect any force variation during the press fit operation. The brushless motor own a 12 bits EnDat absolute encoder to provide an high resolution of
the ram position. Through this two measure system the software FPM ( Focus Process Monitoring), installed in the servo drive, can control your press fit operation in run.

The P2224 cylindrical design is studied for generic scopes and is developed to provide a ram repeatability less of <0.01 mm. The modules are tailored for working in a load range of 10kN to 300kN and can working in compression and in tension. The frame is a monolithic steel tube with the slide surfaces of anti twist ram machined inside and hardened by nurturing treatment to avoid a backlash by wear. The motor power is transmitted to the ball screw by a timing without backlash. All P2224 servo presses series, thanks to the thru holes on the frontal flange, can be mounted in horizontal or vertical position.